Home The blog Spinning Wheels About Health Stuff to buy The Great Forum

Tension By Pitch - Does it work?

The answer is yes. It does work. There's been a lot of discussion around the subject, but really. What's there to discuss? It's not freaking rocket science. Its pure plane physics.

You have a tensioned steel 'string' where the steel itselves has a density of approx. 7.83 g/cm^3. The length can easily be measured, but remember. If the spokes are crossed, the cross can work as clamp-of. For butted spokes, the effective length is the butted part only (add a little). The frequency you want to hear while plucking the spoke is given by the formula:


Using a tensiometer, the actual cross sectional shape of the spoke is very critical. Using pitch, it's only mass and length. My-selves. I do most often use tensiometer for determine the absolute tension, and pitch for relative tension. When in doubt what table to use, I calculate the pitch and take it from there. I've done this several times and later given the tables from manufactures. I've been pretty much spot on every time!! So to you self-proclaimed myth-busters. Sorry guys. It works ;). It's no less accurate than a tensiometer!!

Careful with the units. DYN/cm/grm, Newton/meters/kg or lb/in

You can even take it a bit further. A rev. spoke and a Comp spoke will nearly give the same tone. The mass of the Comp is higher given its larger diameter, but the butted part is shorter. No need to calculate for'em both (unless you want it really accurate).

SS/Fixie - The Wheels

Well OK. I already had some wheels done, and this bike should of course be fully campy track equipped as they all used to be back in the days. Anyways. In the mean time. Waiting for someone to throw me some campy goodies but still wanting some nice quality, here's what the wheels gonna be like. Shimano 7600 track hubs and NISI Sprint rims. As you can see, the rims are actually factory drilled to shave some weight. Nice! :-) I haven't decided on the spokes yet, but I'll probably end up using 2-1.5-2 and alu nipples. I might go for a slightly thicker spoke rear.

CF Wheels

Here's some pics of the finished CF wheel set.




Weight: 1266g (scaled)

Tune / Mavic Reflex / Aero spokes II

Just figured I'll give you a view of the finished build


Real weight is 1402g (scaled). 12g more than estimated

Tune / Mavic Reflex / Aero spokes

That's what my next build's gonna be. Here's a little teas of the hubs. It is to be my every day pair of wheels with no weight limit, stiff enough for some serious sprints and estimated to hit the scale at 1390 grams. Not too bad for a strong 32 spoked front and rear set of wheels. And the price? Ha ha. I never talk about price, but I can say it's below half the price of what an online store would charge and waaay cheaper than any LBS.......... As all my builds are ;)

Everyday Road Wheel Set

These are to be my everyday set of road wheels. Build up around Velocity Escape tubular rims and White Industries LTA (Ti) hubs. Laced up with oval spokes.



Weight: 1440 grams (scaled)

Portable Truing Stand

Now I can true wheels while listening to music,
having dinner, looking at TV, having guests.........
Yes you name it! The list of opportunities is endless.